Olympus Floating Fountains

This product is currently sold out.

OLYMPUS FLOATING FOUNTAINS

 

Manufacturer of Olympus Fountain Series

Made in Ontario, Canada, (huge savings using the Canadian dollar)

The Olympus floating fountains series are durable, dependable, energy efficient equipment that will serve a wide range of customer needs.  

 

Some of the parts are made in local Mennonite shops for high quality and lower pricing.  There are numerous pattern choices for different pond sizes. Olympus strives to manufacture sturdy units that require low horsepower and low running amperage without sacrificing the height and diameter that comparable brands require (as much as 2-3 more horsepower and significantly more power consumption).

 

Each unit is simple to install and easy to maintain and each of the pattern nozzles can be changed in a matter of minutes.

 

Five different motor options and a variety of gorgeous pattern options combine for spectacular beauty worthy of each Greek god/goddess for which they were named:

Aphrodite, Artemis, Athena, Aurora, Bounty, Hermes, Pontus, & Poseidon

 

Artemis

Sixteen angled sprays surround the base of Artemis while eight taller trumpeting streams fill the center.

1/3-hp 10’ UH x 5’ LH x 30’ dia
3/4-hp 11’ UH x 7’ LH x 30’ dia
1-hp 12’ UH x 8’ LH x 35’ dia
1.5-hp 18’ UH x 11’ LH x 45’ dia
3-hp 20’ UH x 13’ LH x 45’ dia

Aphrodite

Available in 1/3-hp only

Two multi-layered bottom crowning patterns are divided by a single center spray in this 3-tier display.

Upper Height: 11’
Mid Height: 9’
Lower Height: 8’
Total Diameter: 24’

 

Athena

Four clusters of angled outside streams create a majestic crowning effect that surrounds four taller center streams.

1/3-hp 11’ UH x 8’ LH x 30’ dia
3/4-hp 13’ UH x 10.5’ LH x 40’ dia
1-hp 13’ UH x 10.5’ LH x 40’ dia
1.5-hp 20’ UH x 12’ LH x 45’ dia
3-hp 20’ UH x 15’ LH x 50’ dia 

Aurora

** Available in 1/3-hp only**

In 2 very distinct tiers, Aurora’s low lying umbrella and high rising center trumpet streams create a lovely daffodil profile.

Upper Height: 8’
Lower Height: 2’-6”
Diameter: 10’

Bounty

** Available in 1/3-hp, 3/4, 1 hp and 1.5hp**

Simple in design, Bountys’ classic crowning profile not only provides elegance, but heavy consistent streams of water flow throughout the entire body.

Upper Height: 8’-6”
Lower Height: 7’
Diameter: 15’ 

Hermes

A willow effect is formed from 10 heavy streams that symmetrically rise and trumpet out at the top.

1/3-hp 11’ ht x 7’ dia
3/4-hp 13’ ht x 5’ dia
1-hp 15’ ht x 5’ dia
1.5-hp 22’ ht x 5’ dia
3-hp 22’ ht x 5’ dia 

Pontus

Available in 1.5- & 3-hp 3 strong tiers carry heavy streams of water to form this trident-like upward bodied fountain.

1.5-hp
Upper Height: 16′, Middle Height: 14′ Lower Height: 12′, Diameter: 22′
3-hp
Upper Height: 25′, Middle Height: 25′ Lower Height: 14′, Diameter: 20′

Poseidon

Eight heavy 45 degree streams surround a single center geyser to create Poseidon’s lotus-like form.

1/3-hp 11’ UH x 9’ LH x 30’ dia
3/4-hp 11’ UH x 7’ LH x 30’ dia
1-hp 11’ UH x 8’ LH x 35’ dia
1.5-hp 21’ UH x 12’ LH x 45’ dia

UH= Upper high, LH= Lower tier height, Dia= Diameter

 

The Olympus Series Display Fountains make it very simple to keep your pond or lake current with a variety of changeable patterns. Each unique nozzle has a look of its own and can fit the needs of ponds both large and small. The 1/3-hp Olympus has a versatile selection of patterns that range from 7’ in diameter all the way up to 30’. Our 1.5-hp Olympus offers height and diameter that can rival comparable brands that require as much as 2 more horsepower. And our favorite feature, you can screw them on and off just like a light bulb, allowing more time to spend enjoying each beautiful pattern.

Nozzles for 1/3-hp:
• Aphrodite
• Artemis
• Aurora
• Athena
• Bounty
• Hermes
• Poseidon
Nozzles for 3/4- & 1-hp:
• Artemis
• Athena
• Hermes
• Poseidon
Nozzles for 1.5-hp:
• Artemis
• Athena
• Hermes
• Pontus
• Poseidon
Nozzles for 3-hp:
• Artemis
• Athena
• Hermes
• Pontus
Aphrodite 1/3-hp Voltage
115
Running Amps
7.9
Cord Lengths (ft)
50,100 & 150
Artemis 1/3-hp
3/4-hp
1-hp
1.5-hp
3-hp
115
115
230
230
230
7.9
7.4
8.4
9.4
16.7
50, 100 & 150
100 & 150
100, 150, 200 & 250
100, 150, 200 & 250
100, 150, 200 & 250
Athena 1/3-hp
3/4-hp
1-hp
1.5-hp
3-hp
115
115
230
230
230
7.9
7.4
8.4
9.4
16.7
50, 100 & 150
100 & 150
100, 150, 200 & 250
100, 150, 200 & 250
100, 150, 200 & 250
Aurora 1/3-hp 115 7.9 50, 100 & 150
Aurora 1/3-hp 115 7.9 50, 100 & 150
Bounty 1/3-hp
3/4
1 hp
1.5hp
115 7.9 50, 100 & 150
Hermes 1/3-hp
3/4-hp
1-hp
1.5-hp
3-hp
115
115
230
230
230
7.9
7.4
8.4
9.4
16.7
50, 100 & 150
100 & 150
100, 150, 200 & 250
100, 150, 200 & 250
100, 150, 200 & 250
Pontus 1.5-hp
3-hp
230
230
9.4
16.7
100, 150, 200 & 250
100, 150, 200 & 250
Poseidon 1/3-hp
3/4-hp
1-hp
1.5-hp
115
115
230
230
7.9
7.4
8.4
9.4
50, 100 & 150
100 & 150
100, 150, 200 & 250
100, 150, 200 & 250
minimum depth of 30” required

 

Olympus Specifications

• Unit shall be a __hp, ___volt, 60 cycle, ___phase vertical pump type fountain

• Unit shall consist of motor assembly, heavy-duty float with anti-fouling screen that surrounds the motor assembly.

• Motor assembly shall be rugged and dependable designed to handle heavy sediment and unique water chemistries often present in fountain applications. Featuring corrosion-resistant construction materials to withstand harsh conditions in fresh water. The motor shell shall be constructed of 316 stainless steel. The motor shaft shall be #303 stainless steel, with motor shaft nitrile rubber slinger to prevent sand and dirt from accumulating. The assembly shall also contain an internal heavy-duty, hard-faced mechanical seal with stainless steel components to keep assembly watertight.

• Unit shall come complete with __ft. of water resistant power cord.

• Motor is attached to either a 27” or a 41” PVC plate and bolted to float for easy installation. All stainless bolts and lockwashers are used.

• Float assembly shall be of a 5-year UV resistant polyethylene plastic. Assembly shall come complete with two (2) eyebolts and two (2) 25’ lengths of tie rope , ( please order longer ropes if needed).

Individuals should be careful in water when unit is in operation.
The Olympus Series Fountains have been designed to operate in temperatures above 32°F
(0°C). Damage will occur to Fountain units if they are left in freezing water and/or allowed to operate after sitting in freezing water. Pond Perfections Inc. will not be held responsible or libel for damage to the unit as a result of operating the unit in temperatures at or below 32°F (0°C). Pond Perfections Inc. is commited to providing the finest fountains available in the marketplace. As a result, specifications are subject to change without notice.

PLEASE CALL FOR PRICING - 1-519 666-0132